AudioCodes RXV200 User And Administrator Manual page 52

5.1.4.2 Manually Connecting to a Wi-Fi Network
➢
To manually connect to a Wi-Fi network:
Note: Make sure to first disconnect your Ethernet cable. If it's connected, the device will not be
able to connect to a Wi-Fi network.
1. Under Wi-Fi, select Add network and then enter the SSID of the network to add
manually.
2. From the 'Security' drop-down, select a security key strength (encryption method).
Version 2.6 52 Document #: LTRT-09982
RXV200