AudioCodes RXV200 User And Administrator Manual page 53

User's and Administrator's Manual
3. Optionally meter the selected network. Leave the setting at its default value of Detect
automatically if you don't want to meter the network. Select a Metered option to meter
it.
Note:
•
'Proxy' and 'DHCP' will automatically be configured by the network.
•
Enabling the setting Turn on Wi-Fi automatically allows the device to automatically
connect in the future to the highest signal-quality network remembered by the device.
•
As an alternative to manually configuring Wi-Fi settings via the device's user interface, you
can configure the Wi-Fi settings described in
Parameter
network/wireless/adavanced_ options/dns1
network/wireless/adavanced_ options/dns2
network/wireless/adavanced_
options/gateway
network/wireless/adavanced_
options/hidden_network
network/wireless/adavanced_
options/ip_addr
network/wireless/adavanced_
options/ip_settings
network/wireless/adavanced_
options/network_prefix_length
network/wireless/adavanced_ options/proxy
network/wireless/adavanced_
options/proxy/auto_config/pac_url
Version 2.6
Table 5-1: Configuration File
Defines the IP of the wireless DNS1.
Defines the IP of the wireless DNS2.
Defines the IP address of the wireless gateway
Defines the name of the wireless hidden network.
Defines the IP address of the static Wi-Fi network if you're
operating with a static Wi-Fi network.
Used to define DHCP.
Defines the network prefix length to be used.
Defines the proxy wireless server source.
Defines the URL of the PAC file.
5. Getting Familiar with RXV200 Settings
Table 5-1, using the Configuration File.
Wi-Fi Parameters
Description
53 RXV200