Smart Mode Versus Basic Mode - Hypertherm Powermax45 SYNC Service Manual

7. Select E.t.
8. Press the mode button to save your changes and exit the setup menu.
9. Do a cold restart of the plasma power supply.

Smart mode versus basic mode

By default the system is in smart mode. Hypertherm recommends that you keep the system in smart
mode. But very experienced operators or qualified service technicians can use basic mode to help with
troubleshooting if necessary.
When there is no Hypertherm cartridge communication with the plasma
power supply, or when torch communication with the plasma power
supply is broken, the system operates as if it is in basic mode, regardless
of the system setting.
Powermax45 SYNC® Service Manual 811480
8
Change system settings
205