Removing Expansion-Card Riser 2 From The Expansion-Card Bracket - Dell PowerEdge R710 Series Hardware Owner's Manual

Figure 3-28. Removing and Replacing Expansion-Card Riser 2
1
1 expansion-card riser 2
3 pin collars (2)
5 riser 2 connector on system board

Removing Expansion-Card Riser 2 From the Expansion-Card Bracket

1 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
2 Open the system. See "Opening the System."
3 Remove any expansion cards from the expansion-card riser 2. See
"Removing an Expansion Card."
4 Remove expansion-card riser 2. See "Removing Expansion-Card Riser 2."
2
5
2 release latch
4 mounting pins (2)
Installing System Components
3
4
127