Integrated Storage Controller Card - Dell PowerEdge R710 Series Hardware Owner's Manual

8 Insert the assembled blank tray into the flex bay and slide the unit in until
the locking mechanism engages.
9 Close the system. See "Closing the System."
10 Reconnect your system and peripherals to their electrical outlets, and turn
on the system.
Figure 3-19. Removing and Installing the Tape Backup Unit
1 tape backup unit
3 power cable for optical drive

Integrated Storage Controller Card

Your system includes a dedicated expansion-card slot on riser 1 for an
integrated storage controller card that provides the storage subsystem for your
system's internal hard drives. The controller supports SAS and SATA hard
drives and also enables you to set up the hard drives in RAID configurations
as supported by the version of the storage controller included with your
system.
1
2
2 interface/power cable
4 mounting tray release tab (2)
Installing System Components
3
4
111