1. Manuals
  2. Brands
  3. Landoll Manuals
  4. Farm Equipment
  5. Brillion SBA71-1
  6. Operator's manual

Landoll Brillion SBA71-1 Operator's Manual

Super soil builder coulter chisel - extended frame
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
'
Super Soil Builder
Coulter Chisel - Extended Frame
Models: SB71-1, HSB71-1 thru 131-1
Operator's Manual
LANDOLL COMPANY, LLC
1900 North Street
Marysville, Kansas 66508
(785) 562-5381
800-428-5655 ~ WWW.LANDOLL.COM
1K705-2410

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Brillion SBA71-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Landoll Brillion SBA71-1

Summary of Contents for Landoll Brillion SBA71-1

  • Page 1 ‘ Super Soil Builder Coulter Chisel - Extended Frame Models: SB71-1, HSB71-1 thru 131-1 Operator’s Manual LANDOLL COMPANY, LLC 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM 1K705-2410...

  • Page 2: Instructions For Ordering Parts

    Instructions for Ordering Parts ** Repair parts must be ordered through an authorized dealer ** DEALER INSTRUCTIONS FOR ORDERING PARTS FROM LANDOLL PARTS DISTRIBUTION CENTER PHONE #: 800-423-4320 OR 785-562-5381 FAX #: 888-527-3909 ORDER ONLINE: Dealer.landoll.com DATA PLATE The Data Plate, which lists the model and serial number of the equipment, is located on the left side of the Super Soil Builder.
  • Page 3 DANGER DO NOT operate or perform any maintenance tasks on this equipment until you have completed the following: 1. Receive proper training to operate this equipment safely. 2. Read and understand the operator’s manual. 3. Be thoroughly trained on inspection and repair procedures. Failure to comply with this warning may result in serious injury or possibly death.
  • Page 5 Table of Contents Safety Introduction ............1-1 Description of Unit .
  • Page 6 TABLE OF CONTENTS Shank Installation ..........2-28 Spring Clamp Shank Assembly .

  • Page 7: Warranty Registration

    Failure to comply with this warning can result in within 10 days of retail purchase, using the Landoll personal injury or death, damage to the Corporation Ag Products on-line registration process.

  • Page 8: Transporting Safety

    TABLE OF CONTENTS SAFETY Safety • When applying decals to the implement, be sure to clean the surface to remove any dirt or residue. Where possible, sign placement should protect the NOTE sign from abrasion, damage, or obstruction from Investigation has shown that nearly 1/3 of all farm mud, dirt, oil etc.

  • Page 9: Maintenance Safety

    TABLE OF CONTENTS SAFETY Safety Instructions for Towing Maintenance Safety Vehicles • Block the machine so it will not roll when working on or under it. The maximum travel speed is the lesser of • Transport Lock installed. • The limit of the road conditions; •...

  • Page 10: High Pressure Fluid Safety

    TABLE OF CONTENTS SAFETY High Pressure Fluid Safety Bolt,1-8 x 3 Tractor Escaping fluid under pressure can be nearly invisible and Drawbar have enough force to penetrate the skin causing serious Hitch injury. Use a piece of cardboard, rather than hands, to search for suspected leaks.
  • Page 11 TABLE OF CONTENTS SAFETY Decals ITEM 1 ITEM 2 ITEM 3 528933 528938 528934 ITEM 5 4K036 Super Soil ITEM 4 Builder 2P151 4K141 ITEM 6 4K141 WARNING CAUTION DO NOT GO NEAR LEAKS DO NOT LUBRICATE, ADJUST OR REPAIR WHEN MACHINE IS IN MOTION. DO NOT TOW OR TRANSPORT FASTER THAN 15 MILES PER HOUR.
  • Page 12 TABLE OF CONTENTS SAFETY FRONT VIEW 7 AND 9 SHANK REAR VIEW 7 AND 9 SHANK Figure 1-5: Decal Locations, 7 and 9 Shank (1 of 4) 1K705-2410...
  • Page 13 TABLE OF CONTENTS SAFETY FRONT VIEW 11 AND 13 SHANK REAR VIEW 11 AND 13 SHANK Figure 1-6: Decal Locations, 11 and 13 Shank (2 of 4) 1K705-2410...
  • Page 14 TABLE OF CONTENTS SAFETY ExtSoilBuildDecalSide LEFT SIDE VIEW RIGHT SIDE SIMILAR Figure 1-7: Decal Locations, Side View (3 of 4) 1K705-2410...
  • Page 15 TABLE OF CONTENTS SAFETY TOP VIEW 7 AND 9 SHANK TOP VIEW 11 AND 13 SHANK Figure 1-8: Decal Locations, Drawbar (4 of 4) 1K705-2410...
  • Page 16 TABLE OF CONTENTS SAFETY Table provided for general use. NOTES: 1-10 1K705-2410...
  • Page 17 Chapter 2 TABLE OF CONTENTS Assembly IMPORTANT CAUTION All Harnesses must be firmly attached to machine Do Not work on or under this machine unless frame members or Hydraulic Hoses so they do not securely blocked and supported by a hoist or sag or become torn loose by field debris.

  • Page 18: Frame Installation

    TABLE OF CONTENTS ASSEMBLY Frame Installation 1. Using blocks or other supports, block up the RH and LH Frames approximately 36 inches. Be sure that it is secure and cannot topple. 2. Attach the RH and LH Frames together with 3/4-10 x 2-1/2 Bolts, Lock Washers, and Nuts.
  • Page 19 TABLE OF CONTENTS ASSEMBLY Figure 2-2: Frame - 7 and 9 Shank 1K705-2410...
  • Page 20 TABLE OF CONTENTS ASSEMBLY Figure 2-3: Frame - 11 and 13 Shank 1K705-2410...
  • Page 21 TABLE OF CONTENTS ASSEMBLY Transport Axle Installation Bearing Stop Chamfer 1. Position Wheel Arm Assemblies or Walking Beam Plate Assemblies under the frame per model. See Bearing Figures 2-5, 2-6, and 2-7. Bearing NOTE Assembly The position of the Wheel Hubs and the longer end of the Wheel Arm Assemblies or Walking Beam Assemblies Frame Pivot Tube are different per model.
  • Page 22 TABLE OF CONTENTS ASSEMBLY Single Wheel Transport Axle Assembly (7 and 9 Shank) Bearing Exposed Bearing on this side Assembly Rockshaft Nut,3/4-10 Lock Washer,3/4 Bolt,3/4-10 x 5-1/2 Head must be on left side for Spring Clamp clearance RH Wheel Arm Assembly Pin,1-1/4 x 6-1/8 Roll Pin,1/4 x 2 Bearing...
  • Page 23 TABLE OF CONTENTS ASSEMBLY Tandem Wheel Transport Axle Assembly (9 Shank) Bearing Bearing Exposed Assembly on this side Rockshaft Nut,3/4-10 Nut,3/4-10 Lock Washer,3/4 Lock Washer,3/4 Bolt,3/4-10 x 5-1/2 Head must be on left side LH Walking for Spring Clamp clearance Beam Assembly Pin,1-1/4 x 6-1/8 Roll Pin,1/4 x 2...
  • Page 24 TABLE OF CONTENTS ASSEMBLY Tandem Wheel Transport Axle Assembly (11 and 13 Shank) Bearing Assembly Bearing Exposed on this side Rockshaft Nut,3/4-10 Lock Washer,3/4 RH Walking Bolt,3/4-10 x 5-1/2 Beam Assembly Head must be on left side for Spring Clamp clearance Pin,1-1/4 x 6-1/8 Roll Pin,1/4 x 2 Bearing...

  • Page 25: Tire Installation

    TABLE OF CONTENTS ASSEMBLY Tire Installation WARNING Use a torque wrench to assure proper torque. Insufficient torque can cause stud breakage and damage the wheel pilots. Over torque can over stress the studs and strip the threads. NOTE All tire/wheel assemblies are mounted with the valve stem facing outward from Hub and Spindle.
  • Page 26 TABLE OF CONTENTS ASSEMBLY Transport Axle Hydraulic 3. Insert another 1-1/4 x 6-13/16 Pin into the Rockshaft Lugs bottom hole. Place two 1-1/4 Flat Washers on Cylinder Installation each side against the Rockshaft Lugs and secure with 1/4 x 2 Roll Pins. This Pin is used for the Transport 1.
  • Page 27 TABLE OF CONTENTS ASSEMBLY Transport Lock Installation 1. Orient the Transport Lock Handle solid round longer end towards the left and the front of the machine. Place Handle between the LH Frame Lugs underneath the Hydraulic Cylinder so that it lays flat on the frame tube and the solid round end rests against the Frame Stops.
  • Page 28 TABLE OF CONTENTS ASSEMBLY Lock Washer,1/2 Locknut,1/2-13 Bolt, 1/2-13 x 1-1/2 Transport Flat Lock Nut,1/2-13 Washer,1/2 Flat Washer,1/2 Locknut,1/2-13 Strap Bushings, 1.25 x 1.875 x 14ga Bolt, Zerk Fitting,1/4 1/2-13 x 4 Bolt, 1/2-13 x 4-1/2 Pin, 1-1/4 x 5-3/8 Handle Roll Pin,1/4 x 2 Figure 2-10: Transport Lock...
  • Page 29 TABLE OF CONTENTS ASSEMBLY Transport Lock Pin Chamfer must be here Rockshaft Transport Lock Hyd Cyl, 3-1/2 x 16 Bearing Assembly Straps FRONT Stop LH Frame Transport Lock Handle in Unlocked (Field) Position Figure 2-11: Transport Lock - Field Position Hyd Cyl, Transport 3-1/2 x 16...
  • Page 30 TABLE OF CONTENTS ASSEMBLY Coulter Gang Assembly - Lock Manual Installation Nut,5/8-11 Washer,5/8 1. Coat Axle Bearing Bores with grease before installing. 2. Mount Coulter Gang Assembly to the Frame by placing an Axle Bearing half without the grease fitting on top of the Coulter Gang Assembly Rockshaft ends, one Axle Bearing must be between the Key Stops.
  • Page 31 TABLE OF CONTENTS ASSEMBLY Nut,5/8-11 Lock Washer,5/8 Strap, 2 x 8 x 1/4 7 Coulter Assembly 8 Coulter Assembly Flat Washer,3/4 Spring Rod Spring Rod Assembly Nut,3/4-10 Assembly Bolt,3/4-10 x 1-3/4 Lock Washer,3/4 Cotter Pin, Lock Washer,3/4 5/32 x 1-1/2 Spring Holder Bushing Clevis Pin,...
  • Page 32 TABLE OF CONTENTS ASSEMBLY Coulter Gang Assembly - Coulter Assembly Hydraulic Installation Key Stops Stud, 1. Coat Axle Bearing Bores with grease before installing. 5/8-11 x 18 2. Thread a 5/8-11 Locknut onto one end of each 5/8-11 x 18 Stud and set aside. 3.
  • Page 33 TABLE OF CONTENTS ASSEMBLY Cylinder Depth Stops Hyd Cyl,3 x 8 The Hydraulic Cylinder orientation is model-dependent. Install Hydraulic Cylinder per individual model. 7 Coulter Assembly 8 Coulter Flat Washer,3/4 Assembly Lock Washer,3/4 Spring Rod Assembly Cotter Pin, 5/32 x 1-1/2 Locknut,5/8-11 Bolt, 3/4-10 x 1-3/4...
  • Page 34 TABLE OF CONTENTS ASSEMBLY Cylinder Depth Stops Hyd Cyl, The Hydraulic Cylinder orientation 3 x 8 is model-dependent. Install Hydraulic Cylinder per individual model. 9 Coulter Assembly 10 Coulter Assembly Flat Washer,3/4 Spring Rod Lock Washer,3/4 Assembly Cotter Pin, 5/32 x 1-1/2 Locknut,5/8-11 Bolt, Spring...
  • Page 35 TABLE OF CONTENTS ASSEMBLY Cylinder Depth The Hydraulic Cylinder orientation Stops is model-dependent. Hyd Cyl, Install Hydraulic Cylinder 3 x 8 per individual model. Bolt, 5/8-11 x 12 7 Coulter Assembly 9 Coulter Assembly Flat Washer,3/4 7 Coulter Assembly Spring Rod Lock Washer,3/4 Assembly Spring Rod...
  • Page 36 TABLE OF CONTENTS ASSEMBLY Cylinder Depth The Hydraulic Cylinder orientation Stops is model-dependent. Install Hydraulic Cylinder Hyd Cyl, per individual model. 3 x 8 Bolt, 5/8-11 x 12 9 Coulter Assembly 9 Coulter Assembly Flat Washer,3/4 Lock Washer,3/4 Spring Rod Assembly Spring Rod Assembly...
  • Page 37 TABLE OF CONTENTS ASSEMBLY Table provided for general use. NOTES: 1K705-2410 2-21...
  • Page 38 TABLE OF CONTENTS ASSEMBLY Scrapers - Optional 11 and 13 Shank Models Install Straps that will function as a Scraper between Scrapers can be install in between Coulter Gang Coulter Gang Assemblies, to the front of the frame tube Assemblies. that runs front to rear where the Coulter Gang Assemblies meet, with 1/2-13 x 4-1/2 Bolts, Lock Washers, and Nuts.
  • Page 39 TABLE OF CONTENTS ASSEMBLY Coulter Gang Assembly Coulter Gang Assembly Strap, 2 x 8-3/4 x 3/8 Frame Strap, 2 x 23-3/4 x 1/2 Strap, 2 x 8-3/4 x 3/8 Bolt, Nut,1/2-13 1/2-13 x 4-1/2 Bolt, Lock Washer,1/2 1/2-13 x 4-1/2 Lock Washer,1/2 Figure 2-25: Scrapers (11 and 13 Shank) 1K705-2410...

  • Page 40: Drawbar Installation

    TABLE OF CONTENTS ASSEMBLY Drawbar Installation Ratchet Handle 1. 7 and 9 Shank Models: Attach the Drawbar Storage Assembly to the Frame Front Lugs with 1-7/16 x 6-3/8 Pins and secure with 1/2 x 2 Roll Pins. See Figure 2-29. 11 and 13 Shank Models: Attach the Drawbar Assembly to the Frame Front Lugs with 1-7/16 x 8 Pins and secure with 1/2 x 2 Roll Pins.
  • Page 41 TABLE OF CONTENTS ASSEMBLY Handle Hairpin Cotter Roll Pin, 5/16 x 2 Rachet Jack Cotter Pin,3/16 x 2 Clevis Pin,1 x 2-1/2 Roll Pin,1/2 x 2 Pin,1-7/16 x 6-3/8 Pin,1 x 6-1/2 Upper Brace Lower Brace Manual Holder Hose Clamp,4-1/2 Pin,1 x 6-1/2 Hose Locknut,...
  • Page 42 TABLE OF CONTENTS ASSEMBLY Handle Hairpin Cotter Roll Pin, Rachet Jack 5/16 x 2 Cotter Pin,3/16 x 2 Clevis Pin,1 x 2-1/2 Upper Brace Roll Pin,1/2 x 2 Lower Brace Pin,1-7/16 x 8 Pin,1 x 6-1/2 Manual Holder Hose Clamp,4-1/2 Roll Pin, 5/16 x 2 Hose...
  • Page 43 TABLE OF CONTENTS ASSEMBLY Shank Points and Shovels Twisted Shovel Installation Assemble a Twisted Shovel onto each Shank with 1/2-13 x 3 Plow Bolts and Flanged Locknuts. See Figure 2-33. NOTE It is easier to bolt the Shovels and Points to the shanks before mounting them onto the machine.

  • Page 44: Shank Installation

    TABLE OF CONTENTS ASSEMBLY Shank Installation 3. Check the Spring Clamp Assembly Double Nested Spring pre-load. For normal operation, the Locknut on Engage Transport Lock before installation. See the end of the Spring U-Bolt should be tightened so “Transport Lock Installation” on page 2-11. that one inch of thread is exposed.

  • Page 45: Rigid Clamp Shank Assembly

    TABLE OF CONTENTS ASSEMBLY Rigid Clamp Shank Assembly 3. Slide Shank between the Shank Support and 2-Hole Plate. Insert 3/4-10 x 7-1/2 Bolt through 3-Hole Plate, 1. Place 3-Hole Plate on the top and Shank Support on Shank Support and Shank, secure with Lock Washer the bottom of the Frame Tube in the positions and Nut.
  • Page 46 TABLE OF CONTENTS ASSEMBLY Shank Positions TOP VIEW The Spring Clamp Assembly MUST clear this area FRONT Figure 2-38: 7 Shank Positions - Single Wheel Model 2-30 1K705-2410...
  • Page 47 TABLE OF CONTENTS ASSEMBLY TOP VIEW FRONT The Spring Clamp Assembly MUST clear this area Figure 2-39: 9 Shank Positions - Single Wheel Machine 1K705-2410 2-31...
  • Page 48 TABLE OF CONTENTS ASSEMBLY TOP VIEW FRONT The Spring Clamp Assembly MUST clear this area Figure 2-40: 9 Shank Positions - Tandem Wheel Machine 2-32 1K705-2410...
  • Page 49 TABLE OF CONTENTS ASSEMBLY TOP VIEW The Spring Clamp Assembly MUST clear this area FRONT Figure 2-41: 11 Shank Positions - Tandem Wheel Machine 1K705-2410 2-33...
  • Page 50 TABLE OF CONTENTS ASSEMBLY TOP VIEW The Spring Clamp Assembly MUST clear this area FRONT Figure 2-42: 13 Shank Positions - Tandem Wheel Machine 2-34 1K705-2410...
  • Page 51 TABLE OF CONTENTS ASSEMBLY Table provided for general use. NOTES: 1K705-2410 2-35...

  • Page 52: Hydraulic Installation

    TABLE OF CONTENTS ASSEMBLY Hydraulic Installation Tightening Procedure For Swivel O-Ring Fittings 1. Lubricate O-Ring and install the fitting until the metal washer which backs up the O-Ring contacts the face IMPORTANT of the boss. Lower the unit to the ground and relieve system 2.
  • Page 53 TABLE OF CONTENTS ASSEMBLY 6. Recheck tractor reservoir to make sure it is within 3. Connect the Cylinder hoses to the tractor. operating limits. 4. Fully extend and retract the Coulter Cylinder 5 or 6 times or more to purge air from the Coulter Circuit. Lift Circuit approximate oil requirement: 0.8 gallons The Cylinder Rod travel should be smooth and Purging the Adjustable Coulter...

  • Page 54: Led Warning Lights Installation

    TABLE OF CONTENTS ASSEMBLY LED Warning Lights 4. Lay out the Lamp Harness, noting that the connectors marked with Green Tape is for the Right Side and Installation Yellow Tape is Left Side. 5. Route the Lamp Harness through the Light Bar 1.
  • Page 55 TABLE OF CONTENTS ASSEMBLY Figure 2-46: Warning Lamp Layout 1K705-2410 2-39...
  • Page 56 TABLE OF CONTENTS ASSEMBLY Light Bracket Light Bracket Tube Tube 23"±1" 23"±1" Red Lamp Red Lamp Amber Amber Lamp Lamp Light Bar 7 AND 9 SHANK Light Bracket Light Bracket Tube Tube 38-3/4"±1" 38-3/4"±1" Amber Amber Lamp Lamp Lamp Lamp Light Bar 11 AND 13 SHANK Figure 2-47: Warning Lamp Installation Dimensions...
  • Page 57 Chapter 3 TABLE OF CONTENTS Operation DANGER DANGER DANGER DANGER Never allow anyone a ride on the Super Soil Always lock the tractor drawbar in the center Builder at any time. Allowing a person to ride on position when transporting the unit. Failure to do the machine can inflict serious personal injury or so can result in serious injury or death and cause death to that person.

  • Page 58: Tractor Preparation

    TABLE OF CONTENTS OPERATION Tractor Preparation • If an operator plugs in the 7-Pin Connector, but the lights do not seem to work right, check the above The Brillion Super Soil Builder is designed to be pulled by items to make sure there is a good connection with a tractor equipped with a CAT 2 Straight Drawbar or the 7-Pin Connector.

  • Page 59: Hydraulic System

    TABLE OF CONTENTS OPERATION Hydraulic System Hydraulic Adjustable Coulter Circuit, if equipped IMPORTANT The Super Soil Builder may be equipped with a Lower the unit to the ground and relieve system Hydraulically Adjustable Coulter Circuit to change the pressure before attempting to repair, adjust, or depth of the front Coulter Gangs at any time during disconnect components.

  • Page 60: General Operation

    TABLE OF CONTENTS OPERATION General Operation IMPORTANT Remove the Handle from the Ratchet Jack before 1. The recommended horsepower requirements are raising or lowering the machine to prevent bending typically 15-20 horsepower per Shank. This will vary the Handle. Store the Handle on the side of the widely due to speed, depth, moisture, residue and Drawbar.
  • Page 61 TABLE OF CONTENTS OPERATION Depth Stops Ratchet Jack Lift Cylinder Handle Transport Lock Ratchet Jack Ratchet Jack Transport Axle Frame must be Handle Storage Tire and Wheel parallel to Ground Assembly 3" Depth Ground Ground Level Level 8" Depth Shank Coulter Gang Figure 3-3: Shank Depth 1K705-2410...
  • Page 62 TABLE OF CONTENTS OPERATION Transport 6. Before transporting: • Know the transport height and width of the unit 1. Check and follow all federal, state, and local being transport. Use caution when transporting requirements before transporting the Super Soil near bridges and power lines. Builder.

  • Page 63: General Torque Specifications

    Chapter 4 TABLE OF CONTENTS Maintenance General Torque Specifications (rev. 4/97) This chart provides tightening torques for general purpose applications when special torques are not specified on process or drawing. Assembly torques apply to plated nuts and capscrews assembled without supplemental lubrication (as received condition). They do not apply if special graphite moly-disulfide or other extreme pressure lubricants are used.

  • Page 64: Hydraulic Fitting Torque Specifications

    TABLE OF CONTENTS MAINTENANCE Hydraulic Fitting Torque Specifications 37 degree JIC, ORS, & ORB (REV. 10/97 This chart provides tightening torques for general purpose applications when special torques are not specified on process or drawing. Assembly torques apply to plated nuts and capscrews assembled without supplemental lubrication (as received condition). They do not apply if special graphite moly-disulfide or other extreme pressure lubricants are used.

  • Page 65: Lubrication Maintenance

    TABLE OF CONTENTS MAINTENANCE Fasteners NOTE The Double Lip Seals should point away from the Hub to Before operating your Brillion machine, check all keep contaminants out and allow grease to pass. hardware for tightness. Use the Tightening Torque Table as a guide.
  • Page 66 TABLE OF CONTENTS MAINTENANCE Annually Rockshaft Center Bearing Ratchet Jack Wheel Arm Link Shank Spring Clamp Rockshaft Bearing Figure 4-2: Lubrication Intervals (1 of 2) 1K705-2410...
  • Page 67 TABLE OF CONTENTS MAINTENANCE Coulter Axle Bearing Assembly w/Long Grease Fitting Coulter Axle Bearing Assembly w/Short Grease Fitting Wheel Hub Lift Hydraulic Cylinder Transport Lock Transport Lock Figure 4-3: Lubrication Intervals (2 of 2) 1K705-2410...

  • Page 68: Hydraulic Maintenance

    TABLE OF CONTENTS MAINTENANCE Hydraulic Maintenance Warning Lamps When connecting the 7-Pin Warning Lamp Connector: IMPORTANT 1. Make sure the Tractor has a good clean Receptacle, Lower the Soil Builder to the ground, and relieve free of dirt and corrosion. hydraulic pressure before attempting to service any 2.
  • Page 69 TABLE OF CONTENTS MAINTENANCE Storage 1. The service life of the Super Soil Builder will be extended by proper off-season storage practices. Prior to storing the unit, complete the following procedures: • Completely clean the unit. • Inspect the machine for worn or defective parts. Replace as needed.
  • Page 70 TABLE OF CONTENTS MAINTENANCE Table provided for general use. NOTES: 1K705-2410...
  • Page 71 Chapter 5 TABLE OF CONTENTS Specifications SBA71 1 HSBA71 1 4,814 lbs. (2,188 kg) Approximate Weight 4,879 lbs. (2,213 kg) 8 ft. 9 in. (2.67 m) Working Width 8 ft. 9 in. (2.67 m) 9 ft. 3 in. (2.82 m) Transport Width 9 ft.

  • Page 72: Specifications

    TABLE OF CONTENTS SPECIFICATIONS HSBA91 1 HSBAW91 1 Approximate Weight 5,590 lbs. (2,5240kg) 5,574 lbs. (2,528 kg) Working Width 11 ft. 3 in. (3.61 m) 11 ft. 3 in. (3.61 m) Transport Width 11 ft. 10 in. (3.61 m) 11 ft. 10 in. (3.61 m) Transport Height 5 ft.
  • Page 73 TABLE OF CONTENTS SPECIFICATIONS HSBAW111 1 HSBAW131 1 Approximate Weight 7,523 lbs. (3,412 kg) 8,110 lbs. (3,679 kg) Working Width 13 ft. 9 in. (4.19 m) 16 ft. 3 in. (4.95 m) 16 ft. 10 in. (5.13 m) Transport Width 14 ft.
  • Page 74 Instructions for Ordering Parts ** Repair parts must be ordered through an authorized dealer ** DEALER INSTRUCTIONS FOR ORDERING PARTS FROM LANDOLL PARTS DISTRIBUTION CENTER PHONE #: 800-423-4320 OR 785-562-5381 FAX #: 888-527-3909 ORDER ONLINE: Dealer.landoll.com DATA PLATE The Data Plate, which lists the model and serial number of the equipment, is located on the left side of the Super Soil Builder.
  • Page 75 Document Control Revision Log: Date Form # Improvement(s): Description and Comments 07/07/2008 1K705-rev0708 New Release 05/2014 1K705-rev0514 Added LED Warning Lights, Updated Drawings 03/2019 1K705-rev0319 Improved Drawings 10/2024 1K705-2410 ECN 503305 - Coulter Cylinder Depth Stop Revised Template...
  • Page 76 Equipment from Landoll Company, LLC is built to exacting standards ensured by ISO 9001:2015 registration at all Landoll manufacturing facilities. Super Soil Builder Coulter Chisel Extrended Frame Models: SB71-1, HSB71-1 thru 131-1 Operator’s Manual Re-Order Part Number 1K705 LANDOLL COMPANY, LLC...

This manual is also suitable for:

Brillion hsba71-1Brillion hsba91-1Brillion hsbaw91-1Brillion hsbaw111-1Brillion hsbaw131-1

Table of Contents