Checking/Setting System Parameters - NEC VERSA NOTE Manual

Checking/Setting System Parameters

See the following table for a list of parameters, their factory default
settings, and alternate settings. A description of each setting follows the
table.
To reset all parameters to the default settings, select F9 or Load Setup
Defaults from the Exit Menu and select
Parameter
Main Menu
Language
System Time
System Date
Diskette Drive A
Internal HDD
Internal CD-ROM
Boot Display Device
System Memory
Extended Memory
CPU Type
CPU Speed
BIOS Version
Advanced Menu
PS/2 Mouse
Installed O/S
Silent Boot
I/O Device Configuration
Serial Port
Infrared Port
Mode
Parallel Port
Mode
Floppy Disk Controller
Yes
Setup Parameters
Default Alternate
Setting Setting(s)
English (US) Japanese
hh:mm:ss
mm/dd/yyyy
1.44/1.25 MB, Disabled
3 1/2"
Auto User Defined
Auto
Both Both, CRT, LCD
640 KB (Auto Detect)
Auto Auto, Disabled, Both
Win98 Win95, Win98, Other
Enabled Enabled, Disabled, Black
Auto Enabled, Disabled, Auto
Disabled IrDA, FIR
FIR Enabled, Disabled, Auto
Auto Output only, Bi-
ECP directional, ECP
Enabled, Disabled
Enabled
Using Setup and Power Management 3-5
.