Powering On / Off - NEC VERSA NOTE Manual

range of 100–240 Volts AC. Verify that the cord and
plug are appropriate for your AC source.
Connect the AC adapter as follows:
Use only the AC adapter that comes with your NEC
Versa Note system. Although other AC adapters
may look similar, using them can damage the
system.
1. Connect the AC adapter cable to the power port on the rear side of
your NEC Versa Note system.
2. Plug one end of the AC power cable into the AC adapter and the
other end into a 120- or 240-volt wall outlet.
Do not cover or place objects on the AC adapter.
Doing so can cause the adapter to overheat.

Powering On / Off

To power on, locate the Power button on the left hand side of the control
panel above the keyboard and press it. To power off the system, press
the Power button. In Windows, the computer automatically shuts down,
when "Shut Down" is selected from the Start menu. That is, you do not
need to press the Power button to switch off the computer.
1-16 Getting Started
Note:
The AC outlet voltage should be in the
CAUTION
WARNING