Advanced Menu; Security Menu - NEC VERSA NOTE Manual

T
Internal CD-ROM — This field is for information only as the BIOS
automatically detects the CD-ROM.
T
Boot Display Device — Allows you to select the display device.
T
System Memory, Extended Memory, CPU Type, CPU Speed and
BIOS Version — These fields are for information only as the BIOS
automatically detects related values.

Advanced Menu

T
PS/2 Mouse — [Auto] allows the OS to determine whether to enable
or disable the PS/2 mouse. [Disabled] prevents any installed PS/2
mouse from functioning. [Both] is also an available option.
T
I/O Device Configuration — lets you configure input/output device
such as Serial Port, Parallel Port, IrDA and Floppy disk controller.
cannot enable or assign it using the Windows device
manager. The device is not listed in the Windows
device list. To control the device using the Windows
device manager, select any setting other than
"Disable" in Setup.
T
Installed O/S — Specifies the installed operating system which you
use most commonly.

Security Menu

T
Set User Password — Specifies if the system prompts you to enter a
password when accessing the system. The Set User Password
function will be enabled once a Supervisor password is set.
T
Set Supervisor Password — Specifies if the system prompts you to
enter a password when entering Setup.
T
Password on Boot — Enables password check when booting.
T
Password on Resume — Enables password check when resuming
from suspend.
3-8 Using Setup and Power Management
Note:
If you disable a device in Setup, you