Table of Contents
Advertisement
SCU Password — Disabled
First Boot — Drive A
The default setting in the VGA submenu is as follows.
Display Mode — LCD
The default setting in the Memory submenu is as follows.
Cache Enable — Enabled.
Exit
Highlight
reboots when you exit the SCU, even if you made no
changes to the settings.
If you made no changes, the following system message
appears:
Press
tinue making SCU selections.
If you changed any of the SCU settings, the following
screen message appears.
and press Ent
r to exit the SCU. The system
Exit
e
ESC to exit now
Any other key to continue
Esc
to exit the utility. Press any other key to con-
Do you wish to save your changes?
ESC to exit – Enter to save and exit
Any other key to continue
If you press
Esc
, the system saves no changes, exits
the SCU, and reboots the system.
If you press
Enter
, the system writes the new setup
values to backup battery memory, exits the SCU,
and reboots the system.
If you press any other key, the system returns you to
the SCU Main menu.
Using the SCU 4-11
Advertisement
Table of Contents
