Table of Contents
Advertisement
The next three blocks show system settings.
The bottom line of the screen shows what key functions
are available at that screen level and what they do.
SCU USE
To make selections in the SCU menus and submenus, use
the keyboard keys as follows:
Use the right and left cursor arrows to highlight your
1.
menu selection.
Press
2.
In the submenu, use the up and down cursor arrows to
3.
highlight a suboption.
Press
4.
tions, depending on the option:
Some options require that you enter information, as
when setting the date or time.
Some options toggle between being enabled and
disabled, as when selecting a start-up setting for
Num Lock through the SCU. Press
a highlighted option. A check appears next to the
enabled option.
Press
is disabled and the check disappears.
The Memory block displays system memory
information.
The Peripherals block shows settings for system
peripherals.
The Drives block specifies the diskette drive and
hard disk drive installed.
.
Enter
. Suboptions give three ways to make selec-
Enter
Enter
to disable an enabled option. The option
Enter
to enable
Using the SCU 4-3
Advertisement
Table of Contents
