Table of Contents
Advertisement
Typematic Rate
Set the speed at which a character repeats when a key is
pressed and held. Choose from the following character per
second (cps) values.
30 cps
20 cps
15 cps
10 cps — default setting
6 cps
2 cps
Typematic Delay
Set the delay time between the key press and starting
the repeat action. Select from the following millisecond
(ms) values.
250 ms
500 ms — default setting
750 ms
1000 ms
Boot Password
Set a password to prevent unauthorized system use. When a
boot password is set, the system requires that the password
be entered correctly before completing the boot cycle.
Enter a password as follows.
1.
Highlight "Boot Password" and press
When prompted, type a password that is from 4 to 8
2.
characters long and press
The system asks you to re-enter the password.
Enter
.
Enter
.
Using the SCU 4-7
Advertisement
Table of Contents
