Scu Password; First Boot - NEC VERSA S User Manual

Hide thumbs Also See for VERSA S:
Table of Contents

Advertisement

3.
Re-enter the password and press
When the password entry is verified, Boot Password is
enabled. No one will be able to use the system without
first entering the password.
If you forget your password, call the NEC Technical Sup-
port number listed in Chapter 6.

SCU Password

Set a password to access the SCU. When this option is
enabled, no one can change system setup parameters
without first entering the correct password. This option
keeps other users from setting a boot password that could
deny you access to the Versa S.
Set an SCU password as follows.
1.
Highlight "SCU Password" and press
2.
When prompted, type a password that is from 4 to 8
characters long and press
The system asks you to re-enter the password.
Re-enter the password and press
3.
When the password entry is verified, SCU Password is
enabled. No one will be able to use the SCU without
first entering the SCU password.
If you forget your password, call the NEC Technical
Support number listed in Chapter 6.

First Boot

Select the first drive to which the BIOS goes for operating
system software at system startup. When you start the sys-
tem, it looks to the drive defined here, then to the other
drives or card for operating system software.
4-8 Using the SCU
Enter
.
Enter
.
Enter
.
.
Enter

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versa s series

Table of Contents