Partition Restore - NEC VERSA LX Manual

A series of hardware detection screens display, the system reboots
and the Windows Setup screen appears. Follow the on-screen
instructions to set up Windows.
You are required to reenter your Microsoft license number.

Partition Restore

If your preinstalled software on drive C: of your multiple partitioned
drive becomes unusable and you cannot boot from the hard disk, use the
Product Recovery CD to restore your primary partition to its initial
shipping configuration.
Use the Product Recovery CD to perform a partition restore as follows:
1. Check the Product Recovery CD title and make sure that it is the
correct CD for your NEC Versa computer and operating system.
2. Put the CD into the CD-ROM drive tray, close the drive door, and
reboot your computer.
3. Read the License Agreement screen that appears. Use the VersaGlide
touchpad to position the cursor on the Accept button. Left click to
accept the agreement.
You have the option of accepting or declining the agreement. If you
decline the agreement, the recovery program exits.
7-12 Solving System Problems
Use Partition Restore only if your hard disk drive
consists of multiple partitions and if drive C: contains
the operating system and related drivers. Move all
other data and applications to other partitions
(drives) or the Partition Restore process will erase
them completely.
A Partition restore deletes all files on drive C and
replaces them with the original factory installed files.
Only use a Partition Restore if the preinstalled
software on drive C: is unusable.