NEC VERSA LX Manual page 25

!
File Bay — Your NEC Versa ships with a 3.5-inch, 1.44-MB diskette
drive or the SuperDisk drive installed in the file bay.
!
Power/Sleep Button — Slide the Power/Sleep button toward the front
of the system to power on, power off, and to put the computer into
Suspend mode.
The Power/Sleep button is a "smart" switch, meaning that it
recognizes when the system is in Suspend mode. If in Suspend mode,
you cannot power off until you slide forward the Power/Sleep button
again to bring it out of Suspend mode.
In addition, the Smart Power switch invokes an orderly shutdown in
the Windows 98 and Windows 95 environments. If you use the
Power/Sleep button to turn off your system while applications are
running, the Smart Power switch alerts the operating system. The
operating system prompts you to save all data and invokes an orderly
shutdown procedure.
Put the unit in Suspend mode when you need to be away from your
system for a short period of time and want to return to where you left
off. Suspend mode shuts down all devices in the system while
retaining data and system status. Use the
combination to initiate a manual save-to-file. Slide the Smart Power
switch (Power/Sleep button) toward the front of the system to resume
from a save-to-file. You can find more detailed information on using
Suspend mode in Chapter 3, "Using the Software."
!
Volume Control — Allows you to control the speaker and headphone
volume.
1-14 Introducing the NEC Versa
Slide the Power/Sleep button toward the front of the system to
power on.
Hold the Power/Sleep button in place for 4 or fewer seconds to
put the system into Suspend mode. (Before using the
Power/Sleep button to put the system into Suspend mode, set the
System Switch BIOS parameter to Sleep button.)
Hold the Power/Sleep button in place for 4 or more seconds to
initiate power override (powers off the system).
key
Fn-Power/Sleep