Partition Restore - NEC VERSA SX User Manual

Partition Restore

If your preinstalled software on drive C: of your multiple partitioned
drive becomes unusable and you cannot boot from the hard disk, use the
Recovery CD to restore your primary partition to its initial shipping
configuration.
Use Partition Restore only if your hard disk drive
consists of multiple partitions and if drive C: contains
the operating system and related drivers. Move all
other data and applications to other partitions
(drives) or the Partition Restore process will erase
them completely.
A Partition restore deletes all files on drive C and
replaces them with the original factory installed files.
Only use a Partition Restore if the preinstalled
software on drive C: is unusable.
Use the Recovery CD to perform a partition restore as follows:
1. Check the Recovery CD title and make sure that it is the correct CD
for your NEC Versa computer and operating system.
2. Put the CD into the CD-ROM reader tray, close the reader door, and
reboot your computer.
3. Read the License Agreement screen that appears. Use the cursor keys
or VersaGlide touchpad to position the cursor on the Accept button.
Left click to accept the agreement.
You have the option of accepting or declining the agreement. If you
decline the agreement, the recovery program exits.
4. In the Restore Choices screen, use the cursor arrows or VersaGlide
touchpad to select the type of restore procedure to use.
7-12 Solving System Problems
! CAUTION