NEC VERSA LX Manual page 191

When your screen goes blank, before the system goes into Suspend
mode (power status LED blinks), just press the space bar or move your
mouse to reactivate your system.
Power/Sleep button and holding it in place for 4 or fewer seconds. This
places the system in a deeper state of "sleep" and requires that you press
the Power button again to bring it back to Active mode. (Before using
the Power/Sleep button to put the system into Suspend mode, set the
System Switch BIOS parameter to Sleep button.)
Putting your system into Suspend initiates the Suspend power-saving
mode and is a convenient way of conserving energy when you are going
to be away from your system for short period of time.
putting the system in a maximum power shutdown. When the system
goes into STF mode, it saves data and system status and then shuts off
power to all components. STF mode lets you save power without first
saving your work. Resuming from STF mode requires less time than
performing a cold boot.
brings the system out of Standby mode.
C-8 Frequently Asked Questions
What is the purpose of Suspend to RAM?
You can initiate full Suspend-to-RAM by pressing the
What is the function of Suspend-to-File?
Suspend-to-File provides the greatest power savings by
How do I bring my system out of Standby mode?
Moving your VersaGlide pointer or using your keyboard