NEC VERSA LX Manual page 29

A – AC Adapter B – AC Power Cable
Note:
the range of 100-240 volts AC. Verify that the cord
and plug are appropriate for your AC source.
Connect the AC adapter as follows:
1. Connect the AC adapter cable to the power port on the back of your
NEC Versa.
2. Plug one end of the AC power cable into the AC adapter and the
other end into a properly grounded 120- or 240-volt wall outlet.
Note:
system uses depends on the country where you are
using it. Contact the local dealer to purchase the
correct power cable.
AC Adapter
Check that the AC outlet voltage falls in
The AC power cable type that your
Getting Started 2-3