External Monitor - NEC VERSA DOCK Manual

3. For non-Plug and Play operating systems such as Windows NT 4.0,
power on the system. The system immediately recognizes the
keyboard or mouse.

External Monitor

The NEC Versa Dock is equipped with an industry standard 15-pin VGA
monitor connector. The monitor connector supports a video graphics
array of various resolutions. See the monitor's user's guide for details.
Follow these steps to connect an external monitor to the NEC Versa
Dock.
1. Check that the docked NEC Versa is powered off and the monitor
power switch is turned off.
2. Position the monitor as follows:
!
!
Note: After you connect an external keyboard,
you can use both the built-in keyboard and external
keyboard simultaneously. (Only the numeric keypad
on the external keyboard works in this case.)
Note: The docked NEC Versa must be powered
off while the monitor is being connected or the
system does not recognize the monitor type.
To use the monitor without the monitor stand, simply place the
monitor on a flat surface next to the NEC Versa Dock.
To use the monitor stand
The monitor stand supports a monitor weighing up
to 55 pounds. Do not place a heavier monitor on the
stand as the heavier monitor may damage the
stand.
Installing Options and Connecting Devices 4-27
CAUTION