NEC VERSA DOCK Manual page 24

Versa tools: accessories and solutions
Hide thumbs Also See for VERSA DOCK:
Table of Contents

Advertisement

Connect the power cable as follows.
Note: Ensure that the voltage selection switch
(located on the back of the NEC Versa Dock) is set
correctly for your environment. In the United States,
most wall outlets require you to set the voltage
selection switch to 115 volts. In many European
countries, however, the voltage setting switch
should be set to 230.
1. Position the NEC Versa Dock on a flat surface close to an AC outlet.
2. Attach one end of the cable to the AC power port on the NEC Versa
Dock.
3. Attach the other end to a properly grounded wall outlet.
The NEC Versa Dock is now powered on.
Connecting the power cable
Docking and Undocking 2-3

Advertisement

Table of Contents
loading

Table of Contents