NEC VERSA DOCK Manual page 71

Follow these steps to connect a serial device to your NEC Versa Dock.
1. Check that both the NEC Versa and the device power are off.
2. Align and connect the 9-pin connector to the serial port on the NEC
Versa Dock.
3. Secure the connection with the screws provided on the cable.
4. Align and connect the other end of the cable to the appropriate port
on the device, if necessary. Secure the connections with the screws
provided, if necessary.
5. Connect the power cable to the device and a properly grounded wall
outlet.
6. Turn on the power to the external device.
Note: Make sure your printer is online before
trying to print. See the printer guide for instructions.
7. Turn on the power to the NEC Versa Dock.
Connecting a serial device
Installing Options and Connecting Devices 4-25