Locking The Nec Versa - NEC VERSA DOCK Manual

Locking the NEC Versa

Turn the key on the side of the NEC Versa Dock to lock the NEC Versa
onto the NEC Versa Dock. You can choose one of the three following
locking states.
!
Locked – This setting keeps the NEC Versa from being removed from
the NEC Versa Dock. You must use the key to unlock the unit before
removing the NEC Versa. An alarm sounds if someone tries to
remove the NEC Versa while it is locked onto the NEC Versa Dock,
even if the NEC Versa Dock is powered off or is not connected to AC
power.
!
Normal – this default position allows you to motorize dock or undock
the NEC Versa. Set the keylock to this position for normal use. To
prevent electrical damage, manual undocking is not allowed when the
keylock is in this state.
2-12 Docking and Undocking
Turning the keylock switch to Locked