NEC VERSA DOCK Manual page 50

4. Remove the front part of the docking tray. First locate and remove
the rubber pads securing the three screws, then loosen and remove
the three screws. Lift the docking tray up and off the NEC Versa
Dock.
5. Remove the front panel from the NEC Versa Dock by removing the
two screws at the bottom and freeing the four tabs from the top of the
panel. Put the screws in a safe place for use when replacing the front
panel.
4-4 Installing Options and Connecting Devices
Keylock switch in the Manual position
Removing the docking tray