Alienware AW2725QF User Manual page 32

Dual-Resolution switching
There are three ways to enable Dual-Resolution switching as shown:
1. Long press joystick to quick change resolution
• Press and hold joystick for two seconds until a message appears on the screen.
2. Using joystick shortcut key to quick change resolution
• Double tap the joystick to trigger the default in-middle shortcut key for the mode switch toggling (Default shortcut Key 3 is
for Dual-Resolution).
3. Using the joystick to change resolution step by step
• Press the joystick button to launch the OSD main menu.
• Move the joystick to select Input source.
• Move the joystick up or down to select Dual-Resolution, move the joystick to switch between 4K and FHD resolution.
Choose any of the mentioned methods, and the following message will appear. Select "Continue" or "Continue & Not Show Again"
to switch the resolution.
NOTE: If you select 'Continue & Not Show Again', the message will not appear the next time you switch the resolution. When
you perform a factory reset, the message will appear again.
Operating the monitor
32
Figure 32. Accessing the Menu Launcher
Alienware 27 Monitor
DP
Game
HDMI 1
Brightness/Contrast
Input Source HDMI 2
Auto Select
AlienFX Lighting
Display Dual-Resolution
PIP/PBP Dual-Resolution Sync
Menu Dual-Resolution Mode Prompt
Personalize Options for DP/HDMI
Reset Input Source
Others
Figure 33. Select Dual-Resolution
Alienware 27 Monitor
Close your PC game applications before switching resolution
to avoid any screen disruptions.
Continue
Continue & Not Show Again
Figure 34. Dual-Resolution switching warning message
FHD
4K
FHD
Cancel
AW2725QF
Exit
AW2725QF