Alienware AW2725QF User Manual page 28

Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow the
NOTE: Do not connect all the cables to the computer simultaneously.
NOTE: The images are for the purpose of illustration only. The appearance of the computer may vary.
o connect your monitor to the computer:
T
1. Turn off your computer.
2. Connect the DisplayPort/HDMI/USB cable from your monitor to the computer.
CAUTION: Before using the monitor, it is recommended to fasten the stand riser to a wall using cable tie or a cord that can
support the weight of monitor in order to prevent the monitor from falling.
3. Turn on your monitor.
4. Select the correct input source from the OSD Menu on your monitor and then turn on your computer.
Connecting the DisplayPort cable
Connecting the HDMI cable
Setting up the monitor
28
cable tie or a cord
Figure 23. P
revent the monitor from falling
DP
Figure 24. Connecting the DisplayPort cable
HDMI
Figure 25. Connecting the HDMI cable
Safety Instructions.
DP
HDMI