Alienware AW2725QF User Manual page 30

Removing the monitor stand
CAUTION: To prevent scratches on the LCD screen when removing the stand, ensure that the monitor is placed on a soft,
clean surface.
NOTE: The following instructions are applicable only for the stand that was shipped with your monitor. If you are connecting a
stand that you purchased from any other source, follow the set up instructions that were included with the stand.
To remove the stand:
1. Place the monitor on a soft cloth or cushion.
2. Press and hold the stand-release button.
3. Lift the stand up and away from the monitor.
VESA wall mounting (optional)
NOTE: Use M4 x 10 mm screws to connect the monitor to the wall-mounting kit.
Refer to the instructions that come with the VESA-compatible wall mounting kit.
1.
Place the monitor on a soft cloth or cushion on a stable flat table.
2. Remove the monitor stand (see
3. Use a Phillips crosshead screwdriver to remove the four screws securing the plastic cover.
4.
Attach the mounting bracket from the wall mounting kit to the monitor.
5. Mount the monitor on the wall. For more information, see the documentation that is shipped with the wall mounting kit.
NOTE: For use only with UL or CSA or GS-listed wall mount bracket with minimum weight/load bearing capacity of 19 kg
(41.89 lb).
Setting up the monitor
30
Figure 28. Removing the monitor stand
Figure 29. VESA wall mounting
Removing the monitor stand).