Power Button, Ir Board, Keyboard; Removing The Power Button, Ir Board - NEC VERSA 6000 Series Service Manual

4-12 Field Service Guidelines

Power Button, IR Board, Keyboard

Remove the power button, IR board and/or keyboard as follows.
1. Remove the LCD and top cover as previously described.
The power button is held in place primarily by the computer's top cover. Once the
2.
top cover is removed, just lift the power button out of its retaining inserts.
Remove the IR board as follows.
3.
Remove the screws securing it in place.
Locate the IR board cable that attaches to connector P7 on the CPU board.
Use a flat-head screwdriver to push open the connector tabs.
Lift up the IR board.
Figure 4-9 Removing the Power Button, IR Board