Table of Contents
Advertisement
Replacing the 3 1/2-Inch Drive Bracket
When replacing the 3 1/2-inch drive bracket, take care to
prevent pulling and loosening the cable connections.
1.
Place the 3 1/2-inch drive bracket in the 3 1/2-inch
device slot.
2.
Slide the 3 1/2-inch drive bracket toward the front of the
chassis so that the tabs secure the bracket.
3.
Use the previously removed bracket screw to secure the
bracket in place.
Screw
Tab
4.
Replace the front panel (see "Replacing the Front
Panel").
5.
Replace the system unit cover.
Securing the 3 1/2-Inch drive bracket
Installing Options 3-45
Power
Supply
3 1/2-Inch
Drive
Bracket
Tabs
Advertisement
Table of Contents
