Table of Contents
Advertisement
Pin 1 End of Module
Aligning the cache module with the socket
!
Before you install a cache module, reduce static
discharge by touching the system's metal chassis.
3.
Align the pin 1 end of the cache module with the pin 1
end of the secondary cache socket. Using equal pressure,
gently press the module into the socket.
Check to see if the newly installed cache module requires
4.
a system board jumper change. See Chapter 5, Setting
System Board Jumpers.
Replace any boards that you may have removed during
5.
this procedure (see "Installing an Expansion Board"
earlier in this chapter).
6.
Replace the system unit cover.
CAUTION
Installing Options 3-27
Advertisement
Table of Contents
