Table of Contents
Advertisement
6.
Carefully lift the clip on the battery socket.
With the positive (+) side facing up, slide the new
7.
battery into the socket.
8.
Replace any removed expansion boards.
Replace the system unit cover.
9.
Connect external peripherals and power cables
10.
Run the Setup Utility to reconfigure your system
11.
parameters.
DIAGNOSTIC DISKETTE
If you are unable to resolve your system's problem using the
Problem/Solutions topics in this chapter, NEC suggests that
you run the diagnostic diskette.
The diagnostic diskette permits quick testing of all major
system components, individual testing of different system
components, and access to various testing options.
To run diagnostics, insert the diagnostic diskette into drive
A with the system unit off. Power on the system. The
system boots from the diskette and provides you with the
test options.
8-12 If You Have a Problem
Advertisement
Table of Contents
