Expansion Board Installation - NEC POWERMATE OFFICE 2513 Service Manual

Expansion Board Installation

Install expansion boards in the system as follows.
1. Remove the system unit cover as previously described.
Follow any preinstallation instructions that came with the expansion board (such
2.
as setting switches or jumpers on the board).
Remove the screw securing an expansion slot cover and remove the cover (see
3.
Figure Section 3-5).
Save the screw for installing the expansion board. Save the slot cover future use.
CAUTION: A slot cover can damage the
system board or any option board if it falls into
the system. Take care to keep the slot cover
from falling when removing the screw.
If the slot cover does fall into the unit, remove it
before replacing the cover.
Figure Section 3-5 Removing a Slot Cover
Option Installation 3-7