Device Cables; Diskette Drive Signal Cable; Ide Signal Cables - NEC POWERMATE OFFICE 2513 Service Manual

Device Cables

The cables used for installation of optional storage devices include:
n

diskette drive signal cable

n

IDE signal cables

n
system power cables.
The diskette drive and IDE hard disk drive/Zip drive signal cables shipped with the system
are three-connector cables that each support two devices.
The CD-ROM reader cable shipped with the system is a two-connector cable that supports
one device. Addition of a slave device requires the replacement of the two-connector cable
with a three-connector cable. The part number for the IDE cable for two devices is
158-050836-002.
Cable connector locations are shown in Figure Section 3-18.
Figure Section 3-18 System Board Cable Connectors
Option Installation 3-23