2-14
Setup and Operation
Checking Selected Files
To continue the restoration process, check the files to be restored as follows.
Look at the list of files in the "Check list of files to be restored" area of the
1.
screen.
To add files to the list, go back to the preceding section and repeat the selection
2.
process.
Remove files from the list as follows:
3.
T
To remove any selected files, highlight the file name and click
list
. Using this method, one item may be removed at a time.
T
To remove the entire list, click
Once the list is set, continue to the next section, "Restoring the Files."
Restoring the Files
Complete the restoration process as follows.
1.
The "Restore the files from the CD" area of the screen offers two options:
T
Restore the files listed — to proceed with the restoration and continue to the
next step.
T
Cancel — to cancel the restoration and return to the NEC System Restore
menu.
To proceed with the restoration, click
2.
restoration is completed, a file restore message appears.
3.
Click
OK.
4.
If any Windows system files were replaced, exit Windows and restart the system.
Recovering the System
If the preinstalled software becomes unusable, or it is impossible to reboot from the hard
disk, the CD Restore can be used to restore the system to its original shipping
configuration.
System Recovery erases and reformats the hard disk completely before reinstalling the files.
Clear list
.
Restore the files listed
Delete item in
. When the