Locating device bays — minitower
A – 3 1/2-Inch Internal Bays
B – 3 1/2-Inch Accessible Bay
Preparing the Device
Before installing a storage device in the system, follow any
preinstallation instructions that come with the device. For
example, check the following information:
T
Diskette drive — remove any termination on an optional
diskette drive. See the documentation that comes with the
drive.
T
IDE drive — check the jumper settings on the device
before installing it. See the documentation that comes with
the device for jumper setting information.
T
CD-ROM drive or DVD-ROM drive — set correctly as
the first (master) or second (slave) device on the secondary
IDE channel.
See "Connecting Device Cables" for more information.
5-64 Installing Options
C – 5 1/4-Inch Accessible Bays