NEC POWERMATE ES 5250 Manual page 71

3. The Partition Information screen that appears in Windows
95 or Windows 98 has three options (Back, FAT 16, and
FAT 32) and lets you select the File Allocation Table
(FAT) type you want to use for the operating system
restore:
T
Click
Back
T
Click
FAT 16
(current FAT type).
T
Click FAT 32
(available for Windows 95 or Windows 98 systems
only).
Note:
a Windows 95 or Windows 98 system configured
for FAT 32. In addition, select FAT16 if a dual-
boot system (with Windows 95 or Windows 98
and Windows NT 4.0) is desired.
4. A FAT 16 or FAT 32 Partition warning screen appears
indicating that the system is about to partition and format
your hard drive using the FDISK program. This warning
screen contains three options: Back, Exit, and Continue.
5. Click
Continue
T
system performs FDISK
T
system reboots
T
partitions are formatted
T
OS and drivers load from the CD
The "Operating System Restore Completed" screen
appears when all files have been restored.
3-24 Configuring the System
to return to the Operating Mode screen.
to select the FAT 16 allocation table
to select the FAT 32 allocation table
Some older software may not work in
. The following steps should take place.