Table of Contents
Advertisement
5. Perform the upgrade exactly as directed by the support
technician and the onscreen prompts.
6. Power off the system as directed (usually by pressing
or pressing the power button).
7. After the system powers off, remove the diskette.
8. Reboot the system and start the Setup program. Select
Load Setup Defaults
recorded Setup selections you made at the beginning of
this procedure to set the parameters.
See Chapter 7 for information about using the website or the
bulletin board.
NEC OS Restore CD
The following procedures describe how to use the NEC OS
Restore CD that ships with your system.
Please read the following sections in their entirety before
using the NEC OS Restore CD to restore the Windows
operating system or the factory-installed drivers on your
system.
Introducing OS Restore Options
The NEC OS Restore CD contains the Windows 95,
Windows 98, or Windows NT operating system and device
drivers for the hardware that was factory-installed in your
system. Should a problem occur that causes data loss or
corruption, you can restore your system to its working state
using this CD.
After restoring the operating system, use the NEC
Application and Driver CD to install your applications,
optional drivers, and online documents.
3-20 Configuring the System
to reset the BIOS defaults. Use the
F1
Advertisement
Table of Contents
