Table of Contents
Advertisement
Installing an expansion board — small desktop
Removing an Expansion Board — Small Desktop or Desktop
To remove an expansion board from a small desktop or
desktop system, use the following steps.
1. Remove the system unit cover (see "Removing the Small
Desktop or Desktop Cover").
2. Label and remove any cables connected to the board.
3. Remove the screw that secures the board to the support
bracket. Set the screw aside (it is used to secure the slot
cover).
4. Pull the board out of the connector and the expansion slot.
5. Replace the slot cover removed when the expansion board
was installed. Secure the cover with the screw.
6. Replace the system unit cover (see "Replacing the Small
Desktop or Desktop Cover").
5-56 Installing Options
Advertisement
Table of Contents
