Table of Contents
Advertisement
Auto redial
With the Auto redial facility, your phone will redial a number up to 10 times if the first attempt fails. A tone will be heard at each redial
attempt. Your phone cannot connect a call if the other party is busy or if there are network problems. Pressing Softkey 2 during a redial
attempt will abort it. To set redial On or Off, use the following procedure.
Press 3. Then press 1 to activate or press 2 to deactivate the Auto redial facility.
Line identification
I
The Line identification facility is network dependent.
The Line identification enables you to choose whether or not to send your own phone number when you make a call and also whether
or not to display a caller's phone number when you receive a call. To set Line identification, use the following procedure.
Press
1, 3 and 4. The Line identification screen is displayed with a
MENU
To set the status of each line (see table right), use the
Press Softkey 1 to set the Line identification On or Off.
Press
to save the current settings.
International dialling codes
When you make an international call from any country, you must start by dialling a special international access code. Your phone has
the facility to prefix a + symbol to the numbers, so that you need not enter the access code for the country that you are calling from.
Entering international dialling codes
With the standby screen displayed, hold down 0. The 0 character displayed will change to a + character.
Then key in the country code, area code, and phone number that you wish to call. The UK country code is always 44, no matter what
country you are dialling from. For example, a typical UK number of 01189 123456 is entered as:
International
country code
access
+
44
and
area code
phone number
1189
123456
over an activated line and a
keys to select a line (the line will flush when selected).
Line type Setting
dialled
over a deactivated line.
received
Send own #
Show connected #
Show incoming #
Return own #
13
Advertisement
Table of Contents
