Security; Change Pins; Pin Code; Pin2 Code - NEC N341I Using Manual

Table of Contents

Advertisement

Security

The facilities outlined in this section enable you to protect your phone from improper and unauthorised use.
You may be required to enter one of the five codes (shown below). When the phone prompts you for one of these codes, key in the
appropriate number.
PIN code (provided by your Network to protect your SIM card if it is stolen)
PIN2 code (provided by your Network for charge information and FDN services protection)
PUK code (personal unblocking key in case you forget PIN code)
PUK2 code (personal unblocking key in case you forget PIN2 code)
Security code
With the standby screen displayed, press

Change PINs

PIN code

Your phone can be set up so it needs your PIN code entered at power up before the phone can be used at all. If the PIN code is not
entered, not even incoming calls can be answered. Entering your PIN code incorrectly 3 times (not necessarily in the same session)
will invalidate the correct PIN code. In this case you will have to contact your service provider for a PUK code to unblock your SIM card.
Changing your PIN code
With the Security menu screen displayed, press 1 twice to display the PIN Change screen.
Key in the current code. You are prompted to enter the new code, then to enter it again as confirmation. A confirmation screen
will be displayed momentarily and the Change PINs screen will be displayed.

PIN2 code

Your phone supports advanced feature that may require a PIN2 code to be entered before they can be accessed or modified. Entering
your PIN2 code incorrectly 3 times (not necessarily in the same session) will invalidate the correct PIN2 code. In this case you will have
to contact your service provider for a PUK2 code.
38
1 and 4 to display the Security menu screen.
MENU
O
If you forget any of these codes
(except the Security code),
ALWAYS contact your service
provider as they are the ONLY
source for your codes.
O
Some SIM cards are set up so
that PIN number entry cannot be
turned off.
O
When SIM PIN Lock is enabled,
you can change the PIN code.
I
The PIN2 code is SIM card
related and may only be
available from your service
provider.

Advertisement

Table of Contents
loading

Table of Contents