Auto Redial; Call Waiting And Holding; Setting Up Call Waiting; Using Call Waiting - NEC N223I Using Manual

Table of Contents

Advertisement

Auto redial

With the Auto redial facility your phone will redial a number 10 times if the first attempt fails. A tone will be heard at each redial attempt. Your
phone cannot connect a call if the other party is busy or if there are network problems. Pressing Softkey 2 during a redial attempt will abort
it. To set redial on or off, use the following procedure.
Press
6 and 5 to activate or deactivate the auto redial facility. A

Call waiting and holding

This facility informs you when a call is being made to your phone while an existing call is in progress.

Setting up call waiting

Press
6 and 6. The Call wait menu will be displayed.
Press 1 to activate call waiting, 2 to cancel it, or 3 to check the status of call waiting.
Press Softkey 1 to accept the confirmation. The call waiting screen will be re-displayed. Press Softkey 2 to return to the phone
settings screen.

Using call waiting

If call waiting is activated, you can use the call waiting facility by using the following procedure.
If you are on a call and another comes in, you will be alerted by a beep in the earpiece.
Press Softkey 1 to put the current call on hold and see if you wish to accept the new incoming call.
Press Softkey 1 to accept the incoming call. You will hear beeps in your earpiece and the caller's phone will now hear the phone
ringing tone.
If you wish to change the call to answer, press Softkey 1.
If you wish to merge calls, press Softkey 2.
If you wish to end the current call, press
When both calls have been ended, the standby screen will be displayed.

Any key answer

When this facility is active, you can connect your phone to an incoming call by pressing any key (except
When this facility is turned off, you can only connect to an incoming call by pressing
incoming calls, use the following procedure.
Press
6 and 8. Press Softkey 1 to activate or deactivate the any key answer facility. A
the facility is active.
16
will be displayed over the icon when the facility is active.
Then press Softkey 1 to retrieve the holding call.
.
, Softkey 2, the
or Softkey 1. To set up how you want to answer
will be displayed over the icon when
or
key).

Advertisement

Table of Contents
loading

Table of Contents