Table of Contents
Advertisement
i-mode settings
With the standby screen displayed, press
Ringer time
This option enables you to select the length of time your phone rings for when mail/MMS is received.
Press 1 to display the Ringer time setting screen.
Use the CLR to delete the existing time, and key in a time between 3 and 10 seconds. Then press
to store the time.
Connection number
This option enables you to select which connection number you use (Factory setting 1 = e-plus, Factory
setting 2 = KPN, User setting 1) to connect to the i-mode service.
Press 2. The connection number options screen will be displayed with the number for the selected option displayed in green.
Use the
and
keys to select the required option and press
Key in the Security code and press Softkey 1. The number for the selected setting will be displayed in green.
If you select the User setting, you will be offered the options shown in the table right. Press the appropriate key for the required
option, and key in the required information.
i-mode lock
If you choose to turn the i-mode lock on, you will not be able to connect to any i-mode services or send or receive mail/MMS/Java™.
Press 3 to display the i-mode lock screen, and press 1 to activate or 2 to deactivate the i-mode lock.
When the i-mode lock is On, the i-mode lock icon (
60
4 and 1 to display the i-mode Settings menu screen.
MENU
.
) is shown at the top of the screen.
O
The connection with the number
displayed in green will be the
connection number used when
you make an i-mode connection.
O
The two factory settings are fixed
settings for connecting to
specific operators, while the user
setting can be changed.
O
You are prompted to enter the
Security code to activate/
deactivate the i-mode lock.
User setting Options
No.
APN (Access point name)
1
i-mode server
2
(Gateway address)
Portal server
3
(i-menu server)
Mail
1
Mail server
4
2
2nd Mail server
3
Confirmation site
User data
1
User name
5
2
Password
Port No.
1
HTTP Port No.
6
2
SSL Port No.
Advertisement
Table of Contents
