Follow these steps to use the Application and Driver CD:
Insert the Application and Driver CD in the CD-ROM drive of
1.
your host PC.
!
!
The CE Setup menu provides a list of available software on the
Application and Driver CD for use with the host PC and
MobilePro 900c.
Select the driver or application you want to load.
2.
Read any license agreement that appears and click OK to accept
3.
the agreement. The setup program automatically loads the
software.
When prompted, click Finish to complete the installation and
4.
return to the CE Setup menu.
4-18 Using the MobilePro
If auto-insert is enabled on your host PC, the CE Setup menu
for the Application and Driver CD appears.
If auto insert is not enabled, go to Start, Run, browse for the
CD-ROM drive.