Table of Contents
Advertisement
!
!
!
!
Continue to the next section to connect the serial PC Connect cable.
Connecting the Serial PC Connect Cable
Before installing Microsoft ActiveSync, use the following procedure to
connect the optional serial PC Connect cable to both your MobilePro
and to your host PC.
Locate and open the serial port cover on the left side of your
1.
MobilePro (see the following figure).
Double click the System icon, select the Hardware tab, and
select the Device Manager button.
Check the Ports listing to determine if any conflicts exist
(another device is assigned to or using the serial port). The
port may be flagged with an exclamation point, for example,
if any conflicts exist.
If another device is assigned to or is using the serial port, you
must reassign the device to free up the serial port for
MobilePro synchronization.
Make certain the port is communicating at 115k.
Locating the serial port
A – MobilePro Serial Port
Getting Started 1-19
Advertisement
Table of Contents
