Table of Contents
Advertisement
Connect the PC Connect (serial) cable to your host PC and to your
!
MobilePro.
Install Microsoft ActiveSync on your host PC.
!
Create a partnership between your host PC and your MobilePro.
!
Verify that the desired synchronization services are configured.
!
Verifying PC Connection Settings
Your MobilePro ships with PC Connection default settings. Follow
these steps to verify the accuracy of the PC Connection settings:
Tap Start, Settings, Control Panel.
1.
Double tap the PC Connection icon.
2.
Verify the following settings.
3.
!
!
Continue to the next section to check the availability of the serial port
on your host PC.
Ensuring the Availability of the Serial Port
The serial port on your host PC must be available for synchronization
with your MobilePro. Follow these steps to ensure the availability of
the serial port:
Access the Setup utility on your host PC to verify that the port is
1.
enabled.
Check the Windows device manager on your host PC to identify
2.
potential conflicts for the serial port.
!
1-18 Getting Started
"Allow connection with desktop computer when device is
attached" is checked.
"Connect using: Serial-19.2" is displayed. (Change this
setting if necessary. If synchronization is unsuccessful, check
your PC to verify it is communicating at 19.2K.)
Go to Start, Settings, Control Panel.
Advertisement
Table of Contents
