Using Power Sources - NEC MOBILEPRO 900C User Manual

Handheld pc
Hide thumbs Also See for MOBILEPRO 900C:
Table of Contents

Advertisement

Gently touch the pointed tip of the stylus to the screen to select an
3.
object. You can touch, tap, or double tap objects on the MobilePro
touch screen.
Note
double click of a mouse.
See "Using Windows H/PC" in Chapter 3 of this guide for additional
information about using the stylus.
When you are done using the stylus, return it to its convenient
4.
holder in the MobilePro.

Using Power Sources

The MobilePro 900c can be powered using the AC adapter or the
system's main battery, making it a truly portable system. The
MobilePro also contains an internal data backup battery whenever the
unit is connected to an AC power source.
Read the following sections for information about using the
MobilePro's power sources.
charge the MobilePro to fully charge the main battery. It might take 6 to
10 hours to fully charge a depleted battery.
The battery charger has a built-in safety shutoff. You might need to
disconnect the AC adapter and reconnect it after about 3 hours of
charging to restart the charging process. If the battery charging LED is
green, check the battery charge by double tapping the Power icon in
the system tray. The main battery is fully charged when the
"Percentage of power left in main batteries" indicates 100%.
To protect your data, do not use the system until the battery is fully
charged
You must repeat this full 10-hour charge cycle only if the battery
becomes fully discharged.
The touch, tap, and double tap act just like a point, click, and
Before using the system for the first time,
Introducing the MobilePro 2-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mp900c - mobilepro handheld pc

Table of Contents