Making Display Panel Adjustments - NEC MOBILEPRO 900C User Manual

Note
power on the unit after installing batteries.
It might be necessary to charge a main battery that has a low charge
for about 30 minutes before you can power on the unit.
The first time you power on the MobilePro, the screen contrast might
need adjustment. See the following section, "Making Display Panel
Adjustments," for details.
If the MobilePro is not used for a specified length of time, it
automatically shuts off. You can select how long the unit remains on
when running on battery power alone through the Power selection in
the Windows CE Control Panel. On the Windows CE desktop, tap
Start, Settings, Control Panel. Double tap the Power icon and select the
Power Off tab to designate a power off time.
Note
synchronize data between your MobilePro and your host PC.
Synchronization occurs each time you connect your MobilePro to your
host PC, once initial synchronization is configured. For details, see
Chapter 1.
For information about backing up and restoring data, see the section in
Chapter 3, "Backing Up and Restoring Data."

Making Display Panel Adjustments

You can adjust the brightness of the display panel in the MobilePro
using two function keys located at the top right of the keyboard.
lower battery life.
Follow these steps to adjust the display panel brightness:
Open the display panel and power on the unit.
1.
You might need to press the Power button several times to
As a general operation rule, frequently back up and
Increasing panel brightness can dramatically
Using the MobilePro 4-3