Table of Contents
Advertisement
Preparing for a Connection Setup
Before you set up a dial-up connection for an Internet Service Provider
(ISP) or Remote Access Server (RAS), and the associated e-mail
properties, you need the following:
Modem (your NEC MobilePro is equipped with an internal data/fax
!
modem)
ISP or RAS account
!
Configuration information from your ISP or network administrator
!
that may include some or all of the following:
— Dial-up telephone number
— TCP/IP settings
— Port settings
— User name and password, if required.
You must create a new connection for each ISP or RAS account that
you want to establish. Once you have created a connection for an ISP,
RAS, etc., you can define an e-mail account for each connection, if so
desired. Follow the instructions in the sections that follow,
"Connecting to an ISP," "Connecting to a RAS," and "Sending and
Receiving E-mail," to create the desired connections.
Connecting the Internal Modem
Follow these steps to connect an RJ-11 telephone cable to the internal
modem:
Open the modem cover on the left side of the NEC MobilePro by
1.
pulling out the left side of the cover.
Carefully plug the RJ-11 telephone cable into the modem
2.
connector.
5-2 Setting Up a Remote Connection
Advertisement
Table of Contents
