NEC MobilePro 900c
Release Notes
Congratulations on purchasing an NEC MobilePro™ 900c Handheld PC. Before
using your MobilePro 900c, please read the following important information.
Installing the NEC USB Sync Drivers
NEC USB Sync drivers are required to recognize the NEC MobilePro 900c when
the MobilePro is connected to the host PC via a USB cable. The NEC USB Sync
drivers come on the NEC MobilePro 900c Application and Driver CD.
Use the following procedure to install the drivers on the host/companion PC.
Note
The following procedure replaces the section "Loading USB Files" in
Chapter 1 of the NEC MobilePro 900c User's Guide.
Insert the NEC MobilePro 900c Application and Driver CD in the
1.
CD-ROM drive of your host PC. If auto-insert is enabled on your host
PC, the CE Setup menu appears. If auto-insert is not enabled, go to Start,
Run, and browse for the CD-ROM drive.
Select "NEC 900 Drivers" from the displayed menu.
2.
Follow the on-screen instructions to complete the driver installation.
3.
Connect the USB PC Link cable from the MobilePro 900c to the host PC.
4.
Microsoft
Click Next to install the USB drivers. The installation prompts you for the
5.
wceusbsh.sys
Browse to the
6.
Select the
7.
installation.
Connecting to ActiveSync via the Network
To connect to ActiveSync
Check that the MobilePro is already partnered with the host system.
Make sure the MobilePro and the host system are on the SAME network.
Ensure that Outlook is open on the host system BEFORE
synchronization.
To connect to ActiveSync using the network, click the
Type
repllog.exe /remote
®
®
Windows
now detects the new hardware (USB device).
file.
system32\drivers\
file and click "Open" to complete the driver
wceusbsh.sys
®
using a network connection, do the following:
.
directory within Windows.
Start
button and select
.
Run
1
Need help?
Do you have a question about the MOBILEPRO 900C - RELEASE NOTES and is the answer not in the manual?
Questions and answers