cecotec CREMMAET TEMPO Instruction Manual page 69

No water is coming out
No milk comes out
Pressure is too high
It is necessary to carry out a
cleaning of the coffee system
It is necessary to carry out a
descaling process
Water leakage
1. The tank inlet is blocked.
2. The tank is not correctly
positioned.
3. The filter in the coffee
system is blocked.
4. The flow meter is
damaged.
1. Milk tank is empty.
2. The steam outlet is
blocked.
3. The cappuccinatore is
blocked.
1. The filter in the brewing
system is blocked.
2. Coffee is too fine.
3. The coffee bean tank is
too full.
4. Air enters the pump while
coffee is brewing.
5. Coffee pressing level too
high
When the coffee system
needs to be cleaned, a beep
will sound.
When a descaling process is
required, a beep will sound.
There is a water leak inside
the coffee machine.
ENGLISH
1 - 2. Fill up the water tank.
Replace it.
3. Clean the filter and replace
it. You can clean it using the
tablet cleaning programme or
by disassembling it.
4. Contact the official Cecotec
Technical Support Service.
1. Fill up the milk tank.
2. Start the milk system
cleaning function.
3. Disassemble and clean
the cappuccinatore or
replace it.
1. Perform a quick rinse of
the coffee system.
2. Turn the grinding level
knob clockwise. The
higher the number
selected, the thicker the
coffee.
3. Do not overfill the coffee
bean tank.
4. Clean the water tank inlet.
5. Reduce the level of coffee
pressing
Follow the instructions in this
manual and carry out a deep
cleaning.
Follow the instructions in
this manual and carry out a
descaling process.
Check all the parts of the
coffee machine to confirm
that everything is correctly
fitted. If the problem persists,
contact the official Cecotec
Technical Support Service.
CREMMAET TEMPO
69