cecotec CREMMAET TEMPO Instruction Manual page 67

4.1 Removing and cleaning the cappuccinatore (milk frother, Fig. 2)
The spout is equipped with a device called Cappuccinatore, which in turn consists of a
removable and easy-to-clean milk system. In order to remove the milk system, it is first
necessary to pull out the metal part of the Cappuccinatore, which is attached by magnets. The
milk system is extracted by a small outward pull.
Step 1: disassemble the cappuccinatore, connector and other parts and wash them
-
with soap and a precision cleaning brush.
Step 2: rinse the parts thoroughly and place them back as shown in the figure.
-
4.2 Maintenance tips
Do not add water to the coffee bean tank.
Do not remove the drip tray, water tank or any other parts while the machine is in operation.
Fill the water tank only with natural mineral or filtered bottled water at room temperature. Do
not add water that is too hot or too cold.
It is recommended to use medium roasted or medium-dark roasted coffee beans that are not
too oily and of natural roast; high roasted coffee should not be used.
When preparing a drink, do not place your hand under the coffee spout; you could burn yourself.
Clean the machine with a damp cloth. Do not use abrasive or corrosive products.
When filling the water or coffee bean container, make sure not to exceed the "MAX" marks.
Do not disconnect the machine from the power supply during drink preparation, automatic
cleaning or restarting.
To avoid splashing, you can adjust the height of the coffee spout to match the height of the cup
of your choice.
Every time you switch off the machine, empty the coffee waste tank and residual water.
To ensure the quality of the coffee, it is recommended to clean the water tank every day (this
also involves changing the water).
Do not immerse the machine in water for cleaning
.
CREMMAET TEMPO
ENGLISH
67